العربية

United States

Archive records carrying the United States country label in the catalog. Read each record’s place evidence: a subject association is not automatically a verified capture location. Unstated places remain unknown.

65,626 matching records; original descriptions and titles are preserved. Search and filters →

Verify the evidence · Cite an item or clip · Rights

2001Internet Archive · FedFlix & National Archives

Hazards in Motion: Mobile Equipment Safety

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Hazards in Motion: Mobile Equipment Safety NIOSH 2001-151d - 2001 Hazards In Motion teaches mobile equipment safety for underground miners. The video follows the misadventures of Ben, a new miner with a short attention span and big ego. Through a series of bad choices, a couple near-death experiences, and some divine intervention, Ben learns the basics of working safely in a modern mechanized mine.

2002Internet Archive · FedFlix & National Archives

TB Respiratory Protection: Administrator's Review

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health TB Respiratory Protection: Administrator's Review NIOSH 2002-114d - 2002 ( Introduction | Part 1 | Part 2 | Document ) Includes the programs 'Respirators: Your TB Defense', 'TB Respiratory Protection: Administrator's Review', and written materials in electronic format.

2002Internet Archive · FedFlix & National Archives

You Are My Sunshine

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health You Are My Sunshine NIOSH 2002-132d - 2002 The video "You Are My Sunshine" tells the story of the Sunshine Mine Disaster of 1972 through the eyes of 27 people who lived through it. The video explores what happened, what went wrong, and what were the lessons learned. The Sunshine Fire was the catalyst for the Metal/Nonmetal Health and Safety Act of 1977, which put in place the MNM regulations we currently have in this country. This video describes in vivid detail what happened during this tragic and historic event which cost the lives of 91 miners.

2004Internet Archive · FedFlix & National Archives

Violence on the Job Case Study

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Violence on the Job Case Study NIOSH 2004-100d - 2004 ( Part 1 | Part 2 ) This video discusses practical measures for identifying risk factors for violence at work, and taking strategic action to keep employees safe. It is based on extensive NIOSH research, supplemented with information from other authoritative sources.

2004Internet Archive · FedFlix & National Archives

Violence on the Job

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Violence on the Job NIOSH 2004-100d - 2004 ( Part 1 | Part 2 ) This video discusses practical measures for identifying risk factors for violence at work, and taking strategic action to keep employees safe. It is based on extensive NIOSH research, supplemented with information from other authoritative sources.

2007Internet Archive · FedFlix & National Archives

Arc Flash Awareness

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Arc Flash Awareness NIOSH 2007-116d - 2007 An arc flash is the sudden release of electrical energy through the air when a high-voltage gap exists and there is a breakdown between conductors. An arc flash gives off thermal radiation (heat) and bright, intense light that can cause burns. Temperatures have been recorded as high as 35,000 °F. High-voltage arcs can also produce considerable pressure waves by rapidly heating the air and creating a blast. This pressure burst can hit a worker with great force and send molten metal droplets from melted copper and aluminum electrical components great distances at extremely high velocities. This video provides information about arc flashes. The target audience includes employees, electrical workers, trainees, subcontractors, vendors, and visitors to the worksite. The downloadable documents include information and discussion topics for electrical workers.

2007Internet Archive · FedFlix & National Archives

Aggregate Training for the Safety Impaired

Health and Human Services Aggregate Training for the Safety Impaired NIOSH 2007-134D 2007 National Institute for Occupational Safety and Health. Safety Training for Everybody Else! Focuses on 14 safety points for new miners at surface sand and gravel operations. The story follows Ted and his partner Slick as they try in vain to work safely at four different aggregate mines. For each lesson learned, Slick gets another injury.

2008Internet Archive · FedFlix & National Archives

Faces of Black Lung

Health and Human Services Faces of Black Lung NIOSH 2008-131 2008 National Institute for Occupational Safety and Health. Each year, approximately 1,000 miners in the U.S. die from coal workers' pneumoconiosis, or 'black lung disease,' a preventable illness caused by exposure to coal mine dust. The video features two miners who share their stories and provide insight on how their lives have changed due to this devastating disease.

2009Internet Archive · FedFlix & National Archives

Take Pride in Your Job: Fall Protection

Health and Human Services Take Pride in Your Job: Fall Protection NIOSH 2009-108D 2009 National Institute for Occupational Safety and Health. This video encourages oil and gas extraction workers to use fall protection and never be “un-clipped” and thus vulnerable when at height. The video features oil and gas extraction workers talking about their use of fall protection and sharing their personal stories about why fall protection should always be worn when working at height. The purpose of the video is to raise awareness of fall injuries in this industry and to provide information about the use, proper fit, and inspection of fall protection. This video is designed to be used in pre-shift or weekly safety meetings.

2004Internet Archive · FedFlix & National Archives

Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 1)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 1) NIOSH 2004-100d - 2004 ( Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Doc ) Given the expected high turnover of the mining workforce, it is very likely that incoming workers will have much less experience than those leaving the workforce. Unfortunately, inexperienced miners have been shown to incur the highest rate of injuries. The piece of machinery most associated with these injuries is the roof bolting machine, which accounts for 56% of machinery-related injuries in underground coal mining. The National Institute for Occupational Safety and Health (NIOSH) has released a new report entitled “Roof Bolting Machine Operators Skills Training for a Walk-Thru Roof Bolter: Trainer’s Guide” (IC 9489). It is designed to help safety trainers develop structured training for new operators of walk-thru bolting machines. This resource will help trainees learn, understand, and apply knowledge and skills. Included in the trainer’s guide are the following tools: a six-part DVD video series, a skill

2004Internet Archive · FedFlix & National Archives

Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 2)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 2) NIOSH 2004-100d - 2004 ( Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Doc ) Given the expected high turnover of the mining workforce, it is very likely that incoming workers will have much less experience than those leaving the workforce. Unfortunately, inexperienced miners have been shown to incur the highest rate of injuries. The piece of machinery most associated with these injuries is the roof bolting machine, which accounts for 56% of machinery-related injuries in underground coal mining. The National Institute for Occupational Safety and Health (NIOSH) has released a new report entitled “Roof Bolting Machine Operators Skills Training for a Walk-Thru Roof Bolter: Trainer’s Guide” (IC 9489). It is designed to help safety trainers develop structured training for new operators of walk-thru bolting machines. This resource will help trainees learn, understand, and apply knowledge and skills. Included in the trainer’s guide are the following tools: a six-part DVD video series, a skill

2004Internet Archive · FedFlix & National Archives

Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 3)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 3) NIOSH 2004-100d - 2004 ( Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Doc ) Given the expected high turnover of the mining workforce, it is very likely that incoming workers will have much less experience than those leaving the workforce. Unfortunately, inexperienced miners have been shown to incur the highest rate of injuries. The piece of machinery most associated with these injuries is the roof bolting machine, which accounts for 56% of machinery-related injuries in underground coal mining. The National Institute for Occupational Safety and Health (NIOSH) has released a new report entitled “Roof Bolting Machine Operators Skills Training for a Walk-Thru Roof Bolter: Trainer’s Guide” (IC 9489). It is designed to help safety trainers develop structured training for new operators of walk-thru bolting machines. This resource will help trainees learn, understand, and apply knowledge and skills. Included in the trainer’s guide are the following tools: a six-part DVD video series, a skill

2004Internet Archive · FedFlix & National Archives

Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 4)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 4) NIOSH 2004-100d - 2004 ( Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Doc ) Given the expected high turnover of the mining workforce, it is very likely that incoming workers will have much less experience than those leaving the workforce. Unfortunately, inexperienced miners have been shown to incur the highest rate of injuries. The piece of machinery most associated with these injuries is the roof bolting machine, which accounts for 56% of machinery-related injuries in underground coal mining. The National Institute for Occupational Safety and Health (NIOSH) has released a new report entitled “Roof Bolting Machine Operators Skills Training for a Walk-Thru Roof Bolter: Trainer’s Guide” (IC 9489). It is designed to help safety trainers develop structured training for new operators of walk-thru bolting machines. This resource will help trainees learn, understand, and apply knowledge and skills. Included in the trainer’s guide are the following tools: a six-part DVD video series, a skill

2004Internet Archive · FedFlix & National Archives

Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 5)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 5) NIOSH 2004-100d - 2004 ( Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Doc ) Given the expected high turnover of the mining workforce, it is very likely that incoming workers will have much less experience than those leaving the workforce. Unfortunately, inexperienced miners have been shown to incur the highest rate of injuries. The piece of machinery most associated with these injuries is the roof bolting machine, which accounts for 56% of machinery-related injuries in underground coal mining. The National Institute for Occupational Safety and Health (NIOSH) has released a new report entitled “Roof Bolting Machine Operators Skills Training for a Walk-Thru Roof Bolter: Trainer’s Guide” (IC 9489). It is designed to help safety trainers develop structured training for new operators of walk-thru bolting machines. This resource will help trainees learn, understand, and apply knowledge and skills. Included in the trainer’s guide are the following tools: a six-part DVD video series, a skill

2004Internet Archive · FedFlix & National Archives

Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 6)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Walk-Thru Roof Bolting Machine Trainer’s Guide (Part 6) NIOSH 2004-100d - 2004 ( Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Doc ) Given the expected high turnover of the mining workforce, it is very likely that incoming workers will have much less experience than those leaving the workforce. Unfortunately, inexperienced miners have been shown to incur the highest rate of injuries. The piece of machinery most associated with these injuries is the roof bolting machine, which accounts for 56% of machinery-related injuries in underground coal mining. The National Institute for Occupational Safety and Health (NIOSH) has released a new report entitled “Roof Bolting Machine Operators Skills Training for a Walk-Thru Roof Bolter: Trainer’s Guide” (IC 9489). It is designed to help safety trainers develop structured training for new operators of walk-thru bolting machines. This resource will help trainees learn, understand, and apply knowledge and skills. Included in the trainer’s guide are the following tools: a six-part DVD video series, a skill

1998Internet Archive · FedFlix & National Archives

Caution: Foundry at Work

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Caution: Foundry at Work NIOSH 98-109d - 1998 ( English | Spanish ) This program addresses the health risks associated with working in a foundry, including silica, metal fumes, toxic gases, noise and heat. Discusses both administrative and physical controls to avoid the hazards found in typical metal melting and casting processes.

1998Internet Archive · FedFlix & National Archives

Caution: Foundry at Work (Spanish)

Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Caution: Foundry at Work NIOSH 98-109d - 1998 ( English | Spanish ) This program addresses the health risks associated with working in a foundry, including silica, metal fumes, toxic gases, noise and heat. Discusses both administrative and physical controls to avoid the hazards found in typical metal melting and casting processes.

Date unknownInternet Archive · FedFlix & National Archives

Fading Gold: The Decline of Aspen in the West

U.S. Department of Agriculture U.S. Forest Service Fading Gold: The Decline of Aspen in the West Fading Gold: The Decline of Aspen in the West is a 12-minute video/DVD available from the Rocky Mountain Research Station. The species has declined across the West from 9 million acres to less than 4 million acres today. For every acre of aspen lost, so is a prime source of water, a productive habitat for wildlife, a valuable source of livestock forage, and one of our most scenic treasures.